Our Equipment
Company Equipment
Our team works only with proven equipment .
The main equipment of the company XAG P100 agricultural drone.
Below you can get acquainted with the main characteristics of this model.
XAG RevoCast 2
PRECISE & FAST SPREAD
In-line opposed centrifugal spreading discs
Strong wind resistance, more accurate spreading
High speed flight Flying
speed up to 13.8 m/s and 280 kg of fertiliser can be spread with one battery
Intelligent screw feeder
Change the screw according to the size of the particles, Precise and non-sticking fertiliser
Precisely adjustable spreading swath
The spreading width can be adjusted only by the flight height
50-liter feed box
Radar detection of residual material to prevent stranding Idling and leakage
Quick detachable and washable
Quickly removable and replaceable gibs Easy to clean
XAG RevoSpray 2
DRENCHING, PRECISE AND SUBTLE
New generation of peristaltic pumps
Maximum flow rate up to 12 l/min
Nozzle cut-off valve
No dripping during operation turning and transportation
Quick release spray bar
Easy to disassemble, transport and maintain
High efficiency plant protection
10 m maximum spray width
40 litre smart tank
Real-time dose sensing
Intelligent centrifugal atomization
60-400 micron atomization range
XAG P100 Safety
All XAG drones are designed for autonomous use. You specify the task and they do the work, and that work is done accurately. Supplied with RTK navigation as standard gives precision control to within 10cm. Safety is a critical factor when flying large drones. The P100 has a multidirectional radar for obstacle avoidance as well as terrain sensors that maintain a consistent height above the ground, no matter how steep the terrain. IPX7 water resistance is important on a spray drone. Every day, it will be operating in a tough, wet environment. Even the batteries can be water cooled when charging in very hot weather.
XAG P100 Performance
At the P100's heart is a lightening fast 1GHz processor. Once you've planned your mission and uploaded it to the drone, it takes over. Power from the 48V smart lithium batteries is sent to the 4, newly designed, brushless motors, which power this mighty work platform. The liquid from the 40L tank is pumped via the high capacity peristaltic pumps. When the liquid hits the spinning, Controlled Droplet Applicators (CDA's), the droplet size can be accurately controlled between 60 microns, fine mist, and 400 microns, a very coarse droplet. All this performance is packed in to a body that can quick-release from the detachable load system in seconds, to be handled easily by one person.
XAG P100 Works
The P100's RevoCast-2 spreading system is designed for hard work. The 60L hopper is powered by twin screw augers that feed the new vertical centrifugal spreading disks. This gives an even spread width of up to 7m. In recent trials, the new P100 was able to spread 280Kg of urea in only 22 minutes. The RevoCast-2 spreader can accept a wide range of media up to 8mm in diameter. And at the end of a long working day, the feed augers and centrifugal spreading disks can be quick-released and hosed clean ready for the next job. To keep the P100 powering through the work, are state-of-the art 48V lithium smart batteries that recharge from 20% to 100% in 15 minutes from our in-field charger.